When was the final time the roof of your building was inspected? If it’s been awhile, the roof may have problems lurking that need immediate attention. Some roof problems cause obvious signs such as for example leaks, while some produce subtle signs that are only detectable at first glance. In either case, leaving the issues unaddressed can cost you thousands when you finally repair them. If the roof on your building has any of the problems listed below, an organization that focuses on commercial roofing should repair them quickly:
Buckled Panels
Roof panels buckle due to weather damage and poor installation. Regardless of the cause, the buckling allows wind to blow underneath the panels, making them loose. As the problem worsens, the panels start to fall off, often coming off in large sections whenever a storm hits. Buckled panels are probably one of the most commonly fixed problems by companies that perform roof repair.
Expended Screw Holes
Expanded screw holes are another problem for panel roofs. As time passes, wind and fluctuating temperatures cause the screw holes in panels to widen around the screws that hold the panels in place. This creates a space where water can leak within the panels and soak the roof deck. After the deck becomes saturated, the thing is costly to fix.
Blistering
Improper heating procedures and dry lapping cause hot bituminous roof systems to blister. Although small blisters seldom pose a problem, large ones can rupture and invite water to seep under the bitumen. Once the blisters form, warm weather typically makes them worse. Because of the humid subtropical climate in a few regions of the country, commercial roofing frequently experiences blistering.
Ponding Water
Blocked drains and improper sloping can cause water to assemble in small ponds on a roof. Repairing a blocked drain is simple, but fixing a sloping problem is more technical. Often, installing a taper insulation system to determine a new slope is a good solution. Through Roof cleaning near me , resolving ponding water is probably the most common types of roof repair.
Loose Flashing
Flashing prevents water from seeping in the crevice where the roof abuts to protrusions such as for example chimneys and vents. As time passes, most flashing must be resealed. If it’s not, leaks could cause serious damage the deck and building interior. Most flashing problems are corrected during the course of scheduled maintenance.
Missing Mortar
Chimneys and high elements of brick walls that have parts of missing mortar could cause leaks. These leaks tend to be recognised incorrectly as leaks in the roof membrane, but a thorough inspection by a company that specializes in commercial roofing will reveal the real problem. Most parts of missing mortar can be repaired with basic tuck pointing procedures.
Conclusion
The problems above are some of the most common known reasons for roof repair. If they are corrected early, most problems are cheap to fix, however, not addressing them until they cause serious problems may necessitate roof replacement. Having a scheduled maintenance agreement with a roofing company is best solution to ensure problems are detected early.